Sixth Army Group  

Go Back   Sixth Army Group > Discussion Areas > Armor, Mech and Weapons Division

Armor, Mech and Weapons Division Showcase of 1:6 Armor, Vehicles and Weapons Projects

Reply
 
Thread Tools Display Modes
Old 05-04-2021, 03:30 PM   #1
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


SdKfz 250 Project

OK guys, I've started a new project. I'm not really doing too many things that others haven't already done, but I do have a few new ones. I bought mine years ago when they first came out, but haven't done much to it since. Some of you may remember that I did my PAK and flak a while back. I got furloughed last year due to the virus then I was laid off. It didn't matter to me since I had planned on retiring any way. I was going to start working on this then all of a sudden my 85 year old mother decides to buy a new house and needs to have it remodeled. My brother-in-law and I gutted the entire house and basically started from scratch building a new home for her. We just finished about two weeks ago so that has given me time to get back into 1/6th stuff. So here goes. I started with the gearbox:





















ROB48 is offline   Reply With Quote
Old 05-04-2021, 05:24 PM   #2
fusilier1944
Company Commander
 
Join Date: Jun 2005
Posts: 718


Re: SdKfz 250 Project

Off to a great start!
fusilier1944 is offline   Reply With Quote
Old 05-04-2021, 05:52 PM   #3
pp
Rifleman
 
Join Date: Feb 2008
Location: Salamanca
Posts: 93
Re: SdKfz 250 Project

Moreeeeeeeeee please, old school work
__________________
Españoles, no se os puede dejar solos!!!!
pp is offline   Reply With Quote
Old 05-05-2021, 06:49 AM   #4
Sixth Vanguard
Board Flunky, aka Site Admin
 
Sixth Vanguard's Avatar
 
Join Date: Jun 2005
Location: Southern California
Posts: 7,428
Images: 29


Re: SdKfz 250 Project

Loving the scratch build stuff
Keep it up and thanks for sharing!
Sixth Vanguard is offline   Reply With Quote
Old 05-06-2021, 12:34 AM   #5
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Thanks guys. Continuing with the gearbox. This is one of the Armorpax gearboxes. I did some extensive cutting and added some things. Looking at it from the sides and rear, you won't notice that I only cut out certain parts once it has been installed..











ROB48 is offline   Reply With Quote
Old 05-07-2021, 12:21 PM   #6
Squidley
Company Commander
 
Squidley's Avatar
 
Join Date: Jun 2005
Location: Ridgefield CT
Posts: 1,095
Images: 40


Re: SdKfz 250 Project

Looks awesome.
__________________
The empires of the future are the empires of the mind. WSC
Squidley is offline   Reply With Quote
Old 05-08-2021, 08:03 PM   #7
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Finished the tow hitch and engine grills. I have had the light grey tow hitch for quite some time. I think it is from Sixth Scale Icons. I have added a few upgrades to it. I also finished the cut outs for the visors.






Last edited by ROB48; 05-08-2021 at 08:10 PM.
ROB48 is offline   Reply With Quote
Old 05-23-2021, 05:01 AM   #8
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Sorry guys. Took a little break to go watch my brother's grandson play a baseball tournament in Tennessee. Did some work on the rear door, medical box, and medical box holder. I removed the rear window and the ridge that runs along the inside of the door. The door handle should have a slight curve in it, also. I also added some strips to the door hinges to offset them because I filled in the openings on the inside of the back wall. The doors would not open properly unless the hinges set out a little.
















Last edited by ROB48; 05-23-2021 at 05:04 AM.
ROB48 is offline   Reply With Quote
Old 05-24-2021, 04:01 AM   #9
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

I also added the outside rear door "T" handle and a simulated inside door latch.



ROB48 is offline   Reply With Quote
Old 05-25-2021, 01:40 AM   #10
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Added the slanted grill vents.

ROB48 is offline   Reply With Quote
Old 05-25-2021, 06:18 PM   #11
Sixth Vanguard
Board Flunky, aka Site Admin
 
Sixth Vanguard's Avatar
 
Join Date: Jun 2005
Location: Southern California
Posts: 7,428
Images: 29


Re: SdKfz 250 Project

Great work
Sixth Vanguard is offline   Reply With Quote
Old 06-01-2021, 04:55 AM   #12
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Thank you.
Did some work on the stowage bin behind the crew seat.



ROB48 is offline   Reply With Quote
Old 06-11-2021, 08:34 PM   #13
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Sorry it took so long to post these. Been having troubles with my server.

I have finished the Troop seat stowage bin. The handles are from Armorpax. Will start on the troop seat.






Last edited by ROB48; 06-11-2021 at 09:34 PM.
ROB48 is offline   Reply With Quote
Old 06-11-2021, 09:23 PM   #14
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

I forgot to mention - one of the first things I did was to cut off the fender tabs and fill the holes. I left some of the tabs in place because I didn't want to depend solely on glue to keep things together. I left the front two (I'm not going to do an engine build so they won't be seen anyway). I also left the right rear one (this one will also not be seen). I left one under the stowage bin/back rest for the troop seat. I added tabs under the bin to keep it level.





ROB48 is offline   Reply With Quote
Old 06-26-2021, 02:41 PM   #15
Panzercommander HOH
Battalion Commander
 
Panzercommander HOH's Avatar
 
Join Date: Apr 2009
Location: SW Ohio
Posts: 2,125


Re: SdKfz 250 Project

Awesome work, Rob!

Best of luck as this 250 build progresses!

- Fred
__________________
Sixth Scale Collectors Club - Cincinnati, Ohio

The SSCC on Facebook
Panzercommander HOH is offline   Reply With Quote
Old 06-27-2021, 03:38 AM   #16
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Thank you, Fred. I've still been busy making parts, I just forgot to post some. Here are a few more.

Here are a few shots of the bottom part of the troop seat.

I glued the blocks in the corners to help keep the seat square. The bottom of the real seat actually opens up, but I'm not going to do that.










This is the box that is mounted on the rear behind the inner storage cabinet, below the MG mount. I'm assuming it is a maintenance kit for the machine gun.

Last edited by ROB48; 06-27-2021 at 04:36 PM.
ROB48 is offline   Reply With Quote
Old 07-13-2021, 05:10 AM   #17
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Sorry this is taking so long. I'm also trying to finish building a deck for my house. My brother also came to visit me from North Carolina for the 4th of July holiday. Here are shots of the MG mount and the radio bracket. I bought the radio from Mike Stannard before his passing. The two gray parts on the MG mount are from a German tripod model kit from Dragon.












Last edited by ROB48; 07-13-2021 at 05:14 AM.
ROB48 is offline   Reply With Quote
Old 07-13-2021, 07:01 AM   #18
pp
Rifleman
 
Join Date: Feb 2008
Location: Salamanca
Posts: 93
Re: SdKfz 250 Project

wow ... the machine stand looks great ... and the radio stand also very good
__________________
Españoles, no se os puede dejar solos!!!!
pp is offline   Reply With Quote
Old 07-13-2021, 07:53 AM   #19
The_Dutchman
Company Commander
 
The_Dutchman's Avatar
 
Join Date: Nov 2007
Location: Duh!....The Netherlands!
Posts: 643
Images: 1


Re: SdKfz 250 Project

That's coming along nicely Rob! Keep it up!
The_Dutchman is offline   Reply With Quote
Old 07-16-2021, 02:28 AM   #20
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Thanks, guys. I'll be working on the inside storage cabinet next.
ROB48 is offline   Reply With Quote
Old 07-18-2021, 01:47 AM   #21
Kapernakis
Tanker
 
Join Date: Jun 2005
Location: Maryland,USA
Posts: 485


Re: SdKfz 250 Project

Looking great so far.

The box mounted on the rear is for the flares.
Kapernakis is offline   Reply With Quote
Old 07-20-2021, 11:17 PM   #22
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Thanks for the info. I had no absolutely no clue what it is for. I just assumed it was a maintenance box since it is so close to the MG.
ROB48 is offline   Reply With Quote
Old 08-04-2021, 02:38 AM   #23
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Here is what I have so far on the inner storage cabinet. I couldn't find a good close-up photo of the door latch so I'm just going to make something that works based on what I can actually see in online photos.



best restaurants on topsail island

ROB48 is offline   Reply With Quote
Old 08-04-2021, 02:43 AM   #24
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Sorry for the restaurant link that showed up on the second picture. I don't know why it did. I tried to delete it, but I couldn't. I have never had this happen before.
ROB48 is offline   Reply With Quote
Old 08-04-2021, 04:47 PM   #25
pp
Rifleman
 
Join Date: Feb 2008
Location: Salamanca
Posts: 93
Re: SdKfz 250 Project

The hinge??? Where did you get it??? She is perfect for the scale !!! Looks great
__________________
Españoles, no se os puede dejar solos!!!!
pp is offline   Reply With Quote
Old 08-04-2021, 06:21 PM   #26
pp
Rifleman
 
Join Date: Feb 2008
Location: Salamanca
Posts: 93
Re: SdKfz 250 Project









Let's see if it's worth it .... If you don't see it well, I can try to take better photos ... The drawing ... My God, what a hunger I was going to spend as a cartoonist !!!! , I hope they serve you
__________________
Españoles, no se os puede dejar solos!!!!
pp is offline   Reply With Quote
Old 08-04-2021, 06:30 PM   #27
pp
Rifleman
 
Join Date: Feb 2008
Location: Salamanca
Posts: 93
Re: SdKfz 250 Project

By the way the book of the photos is: "total detail" "sd kfz250 / 1 Alt" "'Gd' living history" author: Richard Stone, volume 1.

It is, any of the three volumes, a marvel.

If the photos still don't work for you, try here:
http://www.wh-versand.de/WHV_Artikel_DV_Typ.html

I bought all 3 of the RSO, facsimile manuals of the original, excellent quality, it solves many doubts, also the owner is a charming person ...
I hope I have helped you, a great greeting comrade
__________________
Españoles, no se os puede dejar solos!!!!
pp is offline   Reply With Quote
Old 08-04-2021, 08:46 PM   #28
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Thank you very much for the photos. I'll give it a try. Looks a little complicated. I would have thought they could have come up with something more simple.
Below is the hinge info:

Nelsonhobby.com
John Desilets
1/2", flange piano hinge (it comes in a 30" length)
I will actually be using the same hinge on the outside storage box that is mounted on the right fender. It may be a little big, but it is the smallest one he sells.
ROB48 is offline   Reply With Quote
Old 08-04-2021, 09:11 PM   #29
pp
Rifleman
 
Join Date: Feb 2008
Location: Salamanca
Posts: 93
Re: SdKfz 250 Project

Thanks ... I'm going to take several they look very good


Regarding the closure ... I think that if they did not put the padlock there is no closing mechanism, they simply opened it, the padlock, and that latch in the shape of a Chinese cookie would be turned half a turn to release the plate in an "L" shape. closest to the latch, the second "L" plate is only valid for the padlock chain.
Keep in mind that it is the ammunition closet, I do not think they would like something very complex to open in case of "fuss"

Sorry for my english
__________________
Españoles, no se os puede dejar solos!!!!
pp is offline   Reply With Quote
Old 08-04-2021, 09:34 PM   #30
pp
Rifleman
 
Join Date: Feb 2008
Location: Salamanca
Posts: 93
Re: SdKfz 250 Project

Book panzer tracts, sdkfz 250 A & B, page 15-1-20

__________________
Españoles, no se os puede dejar solos!!!!
pp is offline   Reply With Quote
Old 08-04-2021, 10:07 PM   #31
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

This appears to be a completely different latch. Which one was more common? One more question - does the right side of the door fold outward or inward?
ROB48 is offline   Reply With Quote
Old 08-04-2021, 11:01 PM   #32
pp
Rifleman
 
Join Date: Feb 2008
Location: Salamanca
Posts: 93
Re: SdKfz 250 Project

http://calameo.download/0013529280d1cbcc4262e

https://www.britmodeller.com/forums/...man-halftrack/

https://www.recomonkey.com/Land-Plat...ound/i-qtNdSj3

http://www.missing-lynx.com/articles...d250/sd250.htm


Tomorrow I look in my library ... For the black and white photos (original), the second closing ...

For those same photos, taking a good look at the gaps that can be seen and applying German common sense, the center of the door facing outwards and the right wing facing inwards.
__________________
Españoles, no se os puede dejar solos!!!!
pp is offline   Reply With Quote
Old 08-05-2021, 04:11 AM   #33
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Thanks again for the photos and information.
ROB48 is offline   Reply With Quote
Old 08-06-2021, 07:04 AM   #34
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Well, here is my best effort at trying to make the door latch. Thanks PP for the photos. I also corrected to right side of the door. I had it swinging the wrong way. I have a padlock and chain, but I am going to wait to install it until after I paint this. After I started working on the latch, I understood the concept. When the butterfly wing is facing down, the padlock can be used to lock the cabinet. If you turn it over, the door can be closed and latched without having to be locked in case you need to open the cabinet in a hurry.












Last edited by ROB48; 08-06-2021 at 07:08 AM.
ROB48 is offline   Reply With Quote
Old 08-06-2021, 01:28 PM   #35
pp
Rifleman
 
Join Date: Feb 2008
Location: Salamanca
Posts: 93
Re: SdKfz 250 Project

yuhuuuu!!!!
__________________
Españoles, no se os puede dejar solos!!!!
pp is offline   Reply With Quote
Old 08-07-2021, 03:52 AM   #36
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Would you have any good photos of the floor plates? I have seen several, but a couple more would help.
ROB48 is offline   Reply With Quote
Old 08-09-2021, 02:58 AM   #37
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

I found out that I made this piece too short. I had to add 1/2" to it and move the back rest bracket up.

ROB48 is offline   Reply With Quote
Old 08-09-2021, 10:22 PM   #38
Hammer's Africaners
First Sergeant
 
Join Date: Feb 2006
Location: In the middle of New Mexico
Posts: 2,526


Re: SdKfz 250 Project

amazing work, keep those pictures coming!
__________________
Got to love those Africaners
Hammer's Africaners is offline   Reply With Quote
Old 08-16-2021, 04:17 AM   #39
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Did some more work today.
I had to cut down the driver and commander seats. I cut off the top of each position where the seats go. I glued the top parts back on after I cut out about 1/4". I also wanted the back of the seats to be the same so I glued a piece of styrene to the back of the driver's seat. I cut out the square part that covers the drive axle. I cut a piece of PVC to put in its place. I wasn't concerned about the gap because I will cut a piece of tread plate to cover it. I know the real 250 had diamond plate on the floor, but tread plate is cheaper. The little white cutout tube is nothing more than a spacer to keep the rear part of the floor level with the front part. The two big blocks in the first picture are also spacers to keep the troop floor at the correct height.










Last edited by ROB48; 08-16-2021 at 04:24 AM.
ROB48 is offline   Reply With Quote
Old 08-16-2021, 02:56 PM   #40
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

I also want to show what I did to the backside of the firewall. I made the openings larger for the driver and commander's legs. Otherwise, their legs wouldn't fit. I also fixed the backside so I could get a better angle for the steering column.

ROB48 is offline   Reply With Quote
Old 08-18-2021, 11:19 PM   #41
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Not quite what these are supposed to look like, but it's the best I can do.



ROB48 is offline   Reply With Quote
Old 08-22-2021, 04:14 AM   #42
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

I changed this piece and added more "fingers". I don't know if it is right or wrong, but I'm not changing it again (at least I think it looks better).



ROB48 is offline   Reply With Quote
Old 08-23-2021, 01:43 AM   #43
Hammer's Africaners
First Sergeant
 
Join Date: Feb 2006
Location: In the middle of New Mexico
Posts: 2,526


Re: SdKfz 250 Project

Looking good, keep those pictures coming!
__________________
Got to love those Africaners
Hammer's Africaners is offline   Reply With Quote
Old 08-26-2021, 02:07 AM   #44
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

This is one of the two front visor glass replacement compartments on the left side of the driver wall. I will glue the glass piece once these parts have been painted.






Last edited by ROB48; 08-26-2021 at 02:14 AM.
ROB48 is offline   Reply With Quote
Old 08-27-2021, 01:49 AM   #45
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

The storage compartments on the right side of the commander's side. As with the other side, the glass will be installed after painting.



ROB48 is offline   Reply With Quote
Old 08-29-2021, 03:29 AM   #46
Hammer's Africaners
First Sergeant
 
Join Date: Feb 2006
Location: In the middle of New Mexico
Posts: 2,526


Re: SdKfz 250 Project

fantastic work
__________________
Got to love those Africaners
Hammer's Africaners is offline   Reply With Quote
Old 08-30-2021, 04:00 AM   #47
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Thanks. A lot more to come.
ROB48 is offline   Reply With Quote
Old 08-31-2021, 03:10 AM   #48
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Worked on the front storage box. I wanted the door to be able to open so I used the smallest bit in my pin vise box to drill holes in the two outside loops of the door hinge and the box hinge. Then I slipped a very thin piece of wire into the holes. I will add the lock chain later after painting.









ROB48 is offline   Reply With Quote
Old 08-31-2021, 11:48 PM   #49
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Does anybody know what color the extinguisher should be? I know if they are on the outside of a vehicle, they are normally the same color as the vehicle and are normally red if they are on the inside of an enclosed vehicle (like a tank), but what about an open-topped halftrack?

Last edited by ROB48; 09-03-2021 at 03:34 AM.
ROB48 is offline   Reply With Quote
Old 09-03-2021, 07:22 PM   #50
Falckner
Platoon Leader
 
Falckner's Avatar
 
Join Date: Aug 2005
Location: Sweden
Posts: 590
Images: 35
Re: SdKfz 250 Project

Long time no see
looking at you´´r great work, made me go through memory lane
did one back in 2005 those glory days

Love you´r work
__________________
Cheers Falckner
Falckner is offline   Reply With Quote
Old 09-03-2021, 07:25 PM   #51
Falckner
Platoon Leader
 
Falckner's Avatar
 
Join Date: Aug 2005
Location: Sweden
Posts: 590
Images: 35
Re: SdKfz 250 Project

[QUOTE=ROB48;205888]Does anybody know what color the extinguisher should be? I know if they are on the outside of a vehicle, they are normally the same color as the vehicle and are normally red if they are on the inside of an enclosed vehicle (like a tank), but what about an open-topped halftrack?[/QUOTE

Painted my gray , red nja for civil things, yes but other wise ??
__________________
Cheers Falckner
Falckner is offline   Reply With Quote
Old 09-04-2021, 02:05 AM   #52
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Thank you very much for the information and the kind words.
ROB48 is offline   Reply With Quote
Old 09-11-2021, 04:12 AM   #53
SteveKrieg
Company Commander
 
Join Date: Jun 2013
Posts: 746
Re: SdKfz 250 Project

Such amazing craftsmanship is going in to this, it's as if I'm watching the restoration of an actual Sd.Kfz 250. Grand stuff and thanks for sharing, Steve
SteveKrieg is offline   Reply With Quote
Old 09-15-2021, 01:59 AM   #54
ROB48
Platoon Leader
 
Join Date: Jul 2007
Location: Osceola, Iowa
Posts: 573


Re: SdKfz 250 Project

Thanks, Steve. Haven't posted anything for a while. Just returned from South Dakota. My wife and I celebrated our 40th anniversary. Went through the Black Hills, Spearfish, and The Badlands. Had a great time. Will get back to the build soon.

Last edited by ROB48; 09-15-2021 at 02:08 AM.
ROB48 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
SDKFZ 222 armored car project armourguy Armor, Mech and Weapons Division 176 10-28-2016 01:51 PM
DID SdKfz 251 M37M880 General Quarters 5 12-09-2013 12:16 AM
Sdkfz 222 vs Sdkfz 250 Wheel Size cosmicbaby General Quarters 2 01-22-2010 01:52 AM
SDKFZ 234/2 Puma Armored Car Project armourguy Armor, Mech and Weapons Division 123 04-29-2009 03:01 AM
SdKfz 252 and Ammo Trailer and SdKfz 253 Conversion Kits toyrific Armor, Mech and Weapons Division 18 11-02-2008 02:54 AM


All times are GMT. The time now is 10:37 PM.


vBulletin
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
©2005 - 2015 www.sixtharmygroup.com