T.H.A.W.
Tanker
Hello fellow S.A.G. members...
If any of you have as many bottles of paint on your shelf as I do, you get tired of mixing them and shaking your arm to death.
Here is a little D.I.Y. Paint Mixer/Shaker idea to help you.
What you need:
1 = standard sabre saw (blade removed)
1 = 4 1/2" Irwin Quick Grip Clamp = $5.67 at Home Depot, (or $17 for 2 @ Lowes...go figure :dizzy ) or, $1.00 each at Harbor Freight + shipping.
Insert the Quick Clamp into saw where the blade was. Make sure you tighten both srews!
Insert a wide veriety of bottles, and "Mix" your paint with ease.
My saw has 2 speeds (Low & High). As I Airbrush with one bottle, I let the next bottle "mix" on LOW speed... If I need to swap out quick, I mix on HIGH for about 15 to 30 seconds.
I hope this helps someone out...
If any of you have as many bottles of paint on your shelf as I do, you get tired of mixing them and shaking your arm to death.
Here is a little D.I.Y. Paint Mixer/Shaker idea to help you.
What you need:
1 = standard sabre saw (blade removed)
1 = 4 1/2" Irwin Quick Grip Clamp = $5.67 at Home Depot, (or $17 for 2 @ Lowes...go figure :dizzy ) or, $1.00 each at Harbor Freight + shipping.
Insert the Quick Clamp into saw where the blade was. Make sure you tighten both srews!
Insert a wide veriety of bottles, and "Mix" your paint with ease.
My saw has 2 speeds (Low & High). As I Airbrush with one bottle, I let the next bottle "mix" on LOW speed... If I need to swap out quick, I mix on HIGH for about 15 to 30 seconds.
I hope this helps someone out...