The_Dutchman
Company Commander
Properly scaled german wagon wheels with correct number of spokes (12), as used on most of the standard german horse wagons, field kitchens, limbers etc.
Designed and 3d printed using dimensions taken from original museum specimen.
Set contains:
- 2 wheels
- 2 hub caps
- 2 hub cap pegs.
Diameter of center opening is 13mm, just a little larger than 0,5 inch. These wheels can be used to upgrade your current Cyber-Hobby field kitchen and limber.
Kit contains casted and 3d printed resin parts and will require cutting, glueing, sanding and painting.
Note: Nuts and bolts were added to finished example. Nuts and bolts NOT included in kit.
Last picture shows comparison with Cyber-Hobby wheel with 11 (!) spokes on far left.
Cost: €35= per set.
Shipping cost for 1 or 2 sets:
Netherlands: € 10
Europe: € 15
Rest of the world: € 25
Designed and 3d printed using dimensions taken from original museum specimen.
Set contains:
- 2 wheels
- 2 hub caps
- 2 hub cap pegs.
Diameter of center opening is 13mm, just a little larger than 0,5 inch. These wheels can be used to upgrade your current Cyber-Hobby field kitchen and limber.
Kit contains casted and 3d printed resin parts and will require cutting, glueing, sanding and painting.
Note: Nuts and bolts were added to finished example. Nuts and bolts NOT included in kit.
Last picture shows comparison with Cyber-Hobby wheel with 11 (!) spokes on far left.
Cost: €35= per set.
Shipping cost for 1 or 2 sets:
Netherlands: € 10
Europe: € 15
Rest of the world: € 25